Skip to contentNewVirtual showroomEnter the showroom (opens in a new tab)
— Home
en
3D Showroom (opens in a new tab)

Manufacturing

Our furniture factories in Çorlu and Ankara

From cutting the board to the final coat of lacquer, production runs in our own factories under one team.

Overview of the Omar Wood production facility in Çorlu
Representative image

Facility

Our factories in Çorlu and Ankara

Çorlu is within easy road distance of Istanbul and the Kapıkule border crossing, so shipments into Europe and sites in the Marmara region start from there. Ankara is our second production site, close to projects in Central Anatolia.

  • Çorlu · TekirdağCovered production area900 m²
  • Ankara · AkyurtCovered production area2,500 m²
  1. 01CuttingCNC and panel sizing
  2. 02Edge bandingABS, PVC and wood edging
  3. 03PressingVeneering and lamination
  4. 04FinishingLacquer and top coat in the paint shop
  5. 05Pre-assemblyCritical modules assembled in the factory
  6. 06Check and dispatchSize, surface and hardware check
SheetProduction flow
SiteÇorlu · Ankara
Rev.01
Steps06

Machinery

The machines behind the work

  • CNC machining centre
    01

    CNC machining centre

    Nesting, drilling, grooving and profile machining

  • Panel sizing
    02

    Panel sizing

    Millimetre-accurate cutting of board material

  • Edge banding
    03

    Edge banding

    ABS, PVC and wood edging with an invisible glue line

  • Press
    04

    Press

    Membrane and hot pressing; veneering and lamination

  • Paint shop & lacquer booth
    05

    Paint shop & lacquer booth

    Primer, sanding and lacquer coats; drying

  • Boring & dowelling
    06

    Boring & dowelling

    The connection holes that decide alignment on site

Representative image

Process

Eight steps from survey to installation

  1. Survey

    Site or space visit; requirements, budget and programme agreed.

  2. Measurement

    Precise on-site measurement; wall, ceiling and services deviations recorded.

  3. Design / Drawings

    Shop drawings, detail sheets and 3D visualisation where needed.

  4. Sample

    Approval of colour, material and hardware samples; series production starts only after sign-off.

  5. Production

    Cutting, edging, pressing, finishing and pre-assembly to approved drawings.

  6. Quality Control

    Dimension, surface and hardware checks; final inspection before dispatch.

  7. Shipment

    Protective packing, load planning and delivery to site or port.

  8. Installation

    Fitting, adjustment and handover by our own installation team.

Quality control

Before dispatch, before the site

Catching a fault in the factory always costs less than catching it on site. That is why our checkpoints sit inside production, not at the end of it.

  • Incoming material: thickness, surface and colour consistency checked on every board batch; moisture measured on solid wood
  • First-piece approval: for every new unit type the first CNC part is checked against the drawing before series production starts
  • Edge banding: adhesion, corner finish and glue lines
  • Lacquer and paint: surface checked after every coat; colour compared with the approved sample under controlled light
  • Factory pre-assembly: the first set of each apartment type is assembled, door alignment and hardware tested
  • Packing: no box is closed until the parts list, hardware bag and room label are checked
  • Handover: a joint snag and damage inspection on site after installation, closed with a handover report

Dimensional tolerances and surface criteria are set per project from the specification and written on the shop drawings.

Materials

Materials chosen for the project

  • Solid wood

    Solid wood

    Walnut, oak and other species; for doors, tops and detail elements.

  • MDF

    MDF

    A stable, smooth substrate for lacquer and veneer.

  • Lacquer

    Lacquer

    Matt, satin or high gloss, in any RAL / NCS colour.

  • Wood veneer

    Wood veneer

    Natural wood appearance with controlled grain direction and matching.

  • Acrylic

    Acrylic

    High-gloss door surfaces that are easy to clean.

  • Laminate

    Laminate

    Impact- and scratch-resistant surfaces for heavy-use areas.

Our board suppliers and their certificates

We buy our board materials from major Turkish panel manufacturers. The certificates below belong to those manufacturers; each can be checked on the manufacturer's own website.

These certificates belong to our suppliers, not to Omar Wood. Low-emission grades (E0, E05, CARB P2) and FSC-sourced material are supplied to order for a project and stated separately in the quote and delivery documents.

Hardware & fittings

For hinges, runners, lift mechanisms and handles we work with brands matched to the project budget and intensity of use.

  • Häfele
  • Samet
  • Huzur
  • Özakdeniz

Let's talk about your project

Send us your drawings, your room schedule or simply an idea. We return a preliminary quote within 72 hours.

Request a Project Quote Send your project